Fitted ok , a little hard to get the fixing screws in with an alankey would be ok with a socket alankey.
One fitting was slightly distorted, took apart and fitted together straight.
Ok and works well.
Great looking top box at an excellent price. Great service from MotoPlanet.
Fantastic quality, shame they took so long to arrive
An excellent rack, very easy to fit.
Leaves access to the fuel cap, which I was concerned about,but it's fine.
It arrived very quickly and the carriers kept me posted on delivery. Thanks
First time I have used these guys and the service was excellent. I received the sliders within a day.
The sliders are easy to install and took around 10 minutes to put on.
Appears to be a excellent quality sissy bar/ backrest. Fitting to my Superlight was very easy, I would recommend using the bolts on the bike for 2025 models, the ones they came with where, in my opinion, a tiny bit short. Looks really good on my bike too.
Need to add spacers as don't quite fit the brackets when attaching to back box .
But once on look good 😊
Quality packaging, swift delivery. Overall a good experience getting these Puig bobbins for a Kawasaki Eliminator.
At 6’4” I needed some extra screen height this adjustable visor has made a great difference. Easy to fit with carefully drilling and it looks more part of the original package than a clip on.
Easy to install and now very comfortable for the passengers back.
Good quality and well made. Adequate storage for days out. Easy to use.
Pleased with the screen, bit fiddly to fit but great quality! Free next day delivery, great service from Moto Planet. 👍👍
Was looking for a screen for my new speedmaster. I chose this as it looked just the thing. Happily I was correct, not too big, not too small and does a great job.
Really nice bit of kit, had an SH40 previously, this is just so much better, nice design with more modern lines, good lock and mechanism, very well put together and a great price.
Looks good on the bike. Easy fit, no instructions with top box but not hard to figure out. Some explanation of the intended orientation of plate clamp components would be an improvement. Only just takes a full face helmet laid on its side.
Could not be easier to fit. Bolts straight in and allows retention of OEM grab handles. Would stick with shad for other luggage.
Super efficient service again with fast delivery. 😊👍
Good quality product perfect for the money and supplied next day, very impressive.
I’ve seen loads of people in the Zontes 368G Facebook groups fitting those AliExpress top boxes, and honestly… they look alright at first glance, but once you actually look properly, they’re nowhere near the quality of this setup. The base plates on the cheap ones have massive bolts hanging out the bottom and it just looks horrible. And the funny thing is, they don’t even cost that much less — the price difference is minimal. For what you get, it’s really not worth going cheap.
This SHAD box is on a completely different level. The aluminium top really finishes it off — it looks premium, solid, and properly built. The whole installation, from fitting the rack to the top plate and then the box, took me about 25 minutes. Everything lined up perfectly, no messing about, no ugly hardware sticking out anywhere.
Storage is spot on. It will take a full‑face helmet. My Shoei (XS) fits when you place it slightly off‑centre. If you’re using open‑face scooter helmets, you’ll get two in there easily. It’s a proper touring box, not a budget one pretending to be.
Customer chat support was superb as well — quick replies, helpful, and actually knew what they were talking about. Makes a massive difference when you’re spending money on proper kit.
I’m extremely happy with all of it — the rack, the plate, the box — and the service from BikeLuggage has been fantastic from start to finish. Couldn’t be happier.
BikeLuggage,
SHAD TR46 Terra Top Box inc Aluminium Cover
Zontes ZT368T‑G (25–26) SHAD Top Box Fitting Kit
I’ve seen loads of people in the Zontes 368G Facebook groups fitting those AliExpress top boxes, and honestly… they look alright at first glance, but once you actually look properly, they’re nowhere near the quality of this setup. The base plates on the cheap ones have massive bolts hanging out the bottom and it just looks horrible. And the funny thing is, they don’t even cost that much less — the price difference is minimal. For what you get, it’s really not worth going cheap.
This SHAD box is on a completely different level. The aluminium top really finishes it off — it looks premium, solid, and properly built. The whole installation, from fitting the rack to the top plate and then the box, took me about 25 minutes. Everything lined up perfectly, no messing about, no ugly hardware sticking out anywhere.
Storage is spot on. It will take a full‑face helmet. My Shoei (XS) fits when you place it slightly off‑centre. If you’re using open‑face scooter helmets, you’ll get two in there easily. It’s a proper touring box, not a budget one pretending to be.
Customer chat support was superb as well — quick replies, helpful, and actually knew what they were talking about. Makes a massive difference when you’re spending money on proper kit.
I’m extremely happy with all of it — the rack, the plate, the box — and the service from BikeLuggage has been fantastic from start to finish. Couldn’t be happier.
BikeLuggage,
SHAD TR46 Terra Top Box inc Aluminium Cover
Zontes ZT368T‑G (25–26) SHAD Top Box Fitting Kit
Top box exactly as described, arrived earlier than expected. I've used this company before and always received good service.